SetRequestedImage(RasterImage,int[],MedicalViewerSetImageOptions) Method

Summary
Sends the requested images to the control. This method is used when the low memory usage feature is enabled. (for more information see EnableLowMemoryUsage(Int32,Int32,MedicalViewerImageInformation[]))
Syntax
C#
C++/CLI
public void SetRequestedImage( 
   RasterImage image, 
   int[] indexes, 
   MedicalViewerSetImageOptions options 
) 
            public: 
void SetRequestedImage(  
   RasterImage^ image, 
   array<int>^ indexes, 
   MedicalViewerSetImageOptions options 
)  

Parameters

image
A Image object that contains the pages to be set in response to the FrameRequested event.

indexes
Array of Integers containing the index of each page in  image, respectively.

options
An enumerated MedicalViewerSetImageOptions value that specifies whether to insert the page or replace the page with the same index.

Remarks
  • The low memory usage feature works by keeping the control from loading all the frames on runtime. Instead, the control will load only the frames that are currently visible on the cell. The control will send a request each time the user scrolls down or up, changes the number of visible frames, etc. For example, suppose the cell layout is a 2X2 (see Rows and Columns, and the user needs to load more than 100000 frames, the control will not load them all. Instead, this method will send a FramesRequested event when the cell is loaded, requesting 4 frames (1, 2, 3 and 4) (because the cell is 2X2). Once the user scrolls down the cell to view frame number 5, frame number 1 will be disposed of because it is no longer visible, and the event will be fired to request frame number 5. When frames are requested, the user is supposed to send them to the control using the SetRequestedImage method.
  • If the low memory usage feature is not needed, load images directly by assigning the image to the cell using the Image property.
Example
C#
using Leadtools; 
using Leadtools.Codecs; 
using Leadtools.MedicalViewer; 
 
class MedicalViewerForm : Form 
{ 
   private MedicalViewer _medicalViewer; 
   public Label label; 
 
   void MedicalViewerForm_SizeChanged(object sender, EventArgs e) 
   { 
      _medicalViewer.Size = new Size(this.ClientRectangle.Right, this.ClientRectangle.Bottom); 
   } 
 
   public MedicalViewerForm() 
   { 
      RasterCodecs _codecs = new RasterCodecs(); 
      RasterImage _image; 
 
      this.SizeChanged += new EventHandler(MedicalViewerForm_SizeChanged); 
 
      // Create the medical viewer and adjust the size and the location. 
      _medicalViewer = new MedicalViewer(1, 2); 
      _medicalViewer.Location = new Point(0, 0); 
      _medicalViewer.Size = new Size(this.ClientRectangle.Right, this.ClientRectangle.Bottom - 10); 
 
      // Load an image and then add it to the control. 
      //_image = _codecs.Load(LeadtoolsExamples.Common.ImagesPath.Path + "xa.dcm"); 
      MedicalViewerMultiCell cell = new MedicalViewerMultiCell(null, true, 1, 1); 
      _medicalViewer.Cells.Add(cell); 
 
      // add some actions that will be used to change the properties of the images inside the control. 
      cell.AddAction(MedicalViewerActionType.WindowLevel); 
      cell.AddAction(MedicalViewerActionType.Alpha); 
      cell.AddAction(MedicalViewerActionType.Offset); 
 
      // assign the added actions to a mouse button, meaning that when the user clicks and drags the mouse button, the associated action will be activated. 
      cell.SetAction(MedicalViewerActionType.WindowLevel, MedicalViewerMouseButtons.Left, MedicalViewerActionFlags.Active); 
      cell.SetAction(MedicalViewerActionType.Alpha, MedicalViewerMouseButtons.Middle, MedicalViewerActionFlags.Active); 
      cell.SetAction(MedicalViewerActionType.Offset, MedicalViewerMouseButtons.Right, MedicalViewerActionFlags.Active); 
 
      cell.Rows = 1; 
      cell.Columns = 1; 
      cell.FitImageToCell = true; 
 
      // adjust some properties of the cell and add some tags. 
      _medicalViewer.Cells[0].SetTag(2, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.UserData, "EX. ID 230-36-5448"); 
      _medicalViewer.Cells[0].SetTag(4, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Frame); 
      _medicalViewer.Cells[0].SetTag(6, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Scale); 
      _medicalViewer.Cells[0].SetTag(2, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.WindowLevelData); 
      _medicalViewer.Cells[0].SetTag(1, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.FieldOfView); 
 
 
      // Load another image and then add it to the control. 
      _image = _codecs.Load(Path.Combine(LEAD_VARS.ImagesDir,"mr.dcm")); 
      _medicalViewer.Cells.Add(new MedicalViewerMultiCell(_image, true, 2, 2)); 
 
      // add some actions that will be used to change the properties of the images inside the control. 
      _medicalViewer.Cells[1].AddAction(MedicalViewerActionType.WindowLevel); 
      _medicalViewer.Cells[1].AddAction(MedicalViewerActionType.Alpha); 
      _medicalViewer.Cells[1].AddAction(MedicalViewerActionType.Offset); 
      _medicalViewer.Cells[1].AddAction(MedicalViewerActionType.RectangleRegion); 
 
      // assign the added actions to a mouse button, meaning that when the user clicks and drags the mouse button, the associated action will be activated. 
      _medicalViewer.Cells[1].SetAction(MedicalViewerActionType.RectangleRegion, MedicalViewerMouseButtons.Left, MedicalViewerActionFlags.Active); 
      _medicalViewer.Cells[1].SetAction(MedicalViewerActionType.Alpha, MedicalViewerMouseButtons.Middle, MedicalViewerActionFlags.Active); 
      _medicalViewer.Cells[1].SetAction(MedicalViewerActionType.Offset, MedicalViewerMouseButtons.Right, MedicalViewerActionFlags.Active); 
 
      // adjust some properties of the cell and add some tags. 
      _medicalViewer.Cells[1].SetTag(2, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.UserData, "EX. ID 230-36-5448"); 
      _medicalViewer.Cells[1].SetTag(4, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Frame); 
      _medicalViewer.Cells[1].SetTag(6, MedicalViewerTagAlignment.TopLeft, MedicalViewerTagType.Scale); 
      _medicalViewer.Cells[1].SetTag(2, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.WindowLevelData); 
      _medicalViewer.Cells[1].SetTag(1, MedicalViewerTagAlignment.BottomLeft, MedicalViewerTagType.FieldOfView); 
 
      label = new Label(); 
      label.Location = new Point(0, this.ClientRectangle.Bottom - 10); 
      label.Size = new Size(this.ClientRectangle.Right, 10); 
      label.Text = "Here the statistical information will appear"; 
 
      Controls.Add(_medicalViewer); 
      _medicalViewer.Dock = DockStyle.Fill; 
   } 
   public MedicalViewer Viewer 
   { 
      get { return _medicalViewer; } 
   } 
} 
 
MedicalViewerForm GetMedicalControl() 
{ 
   return new MedicalViewerForm(); 
} 
 
// This example shows how to use the low memory usage feature to display a medical image with multiple pages. it will also invert all the bitmap to show the invert function works even if the bitmap is not loaded yet. 
public void MedicalViewerLowMemoryUsageExample() 
{ 
   MedicalViewerForm myForm = GetMedicalControl(); 
   MedicalViewer medicalViewer = myForm.Viewer; 
   MedicalViewerMultiCell cell = (MedicalViewerMultiCell)(medicalViewer.Cells[0]); 
 
 
   RasterCodecs codecs = new RasterCodecs(); 
   int i = 0; 
   int count; 
 
 
   CodecsImageInfo info; 
   string fileName = Path.Combine(LEAD_VARS.ImagesDir,"xa.dcm"); 
   info = codecs.GetInformation(fileName, true); 
   count = info.TotalPages; 
   MedicalViewerImageInformation[] a = new MedicalViewerImageInformation[count]; 
 
   for (i = 0; i < count; i++) 
   { 
      info = codecs.GetInformation(fileName, true, i + 1); 
      a[i] = new MedicalViewerImageInformation(); 
      a[i].ImageHeight = info.Height; 
      a[i].ImageWidth = info.Width; 
      a[i].XResolution = info.XResolution; 
      a[i].YResolution = info.YResolution; 
   } 
 
   cell.ActiveSubCellChanged += new EventHandler<MedicalViewerActiveSubCellChangedEventArgs>(medicalViewer_ActiveSubCellChanged1); 
   cell.FramesRequested += new EventHandler<MedicalViewerRequestedFramesInformationEventArgs>(medicalViewer_FramesRequested); 
   cell.EnableLowMemoryUsage(2, count, a); 
   myForm.ShowDialog(); 
} 
 
void medicalViewer_ActiveSubCellChanged1(object sender, MedicalViewerActiveSubCellChangedEventArgs e) 
{ 
   string imageInformation = ""; 
   MedicalViewerMultiCell cell = (MedicalViewerMultiCell)sender; 
 
   if (cell.VirtualImage[e.SubCellIndex].ImageExist) 
   { 
      imageInformation = "Image bit per pixel = " + cell.VirtualImage[e.SubCellIndex].Image.BitsPerPixel.ToString(); 
   } 
 
   ((MedicalViewerForm)(cell.ParentViewer.Parent)).label.Text = imageInformation + " HasRegion = " + cell.VirtualImage[e.SubCellIndex].HasRegion; 
} 
 
void medicalViewer_FramesRequested(object sender, MedicalViewerRequestedFramesInformationEventArgs e) 
{ 
   MedicalViewerMultiCell cell = (MedicalViewerMultiCell)(sender); 
   string fileName =Path.Combine(LEAD_VARS.ImagesDir,"xa.dcm"); 
   RasterCodecs _codecs = new RasterCodecs(); 
   int i; 
   RasterImage b; 
 
   if (e.RequestedFramesIndexes.Length > 0) 
   { 
      b = _codecs.Load(fileName, 0, CodecsLoadByteOrder.BgrOrGray, e.RequestedFramesIndexes[0] + 1, e.RequestedFramesIndexes[0] + 1); 
   } 
   else 
      return; 
 
   for (i = 1; i < e.RequestedFramesIndexes.Length; i++) 
   { 
      b.AddPage(_codecs.Load(fileName, 0, CodecsLoadByteOrder.BgrOrGray, e.RequestedFramesIndexes[i] + 1, e.RequestedFramesIndexes[i] + 1)); 
   } 
 
   cell.SetRequestedImage(b, e.RequestedFramesIndexes, MedicalViewerSetImageOptions.Insert); 
} 
 
 
static class LEAD_VARS 
{ 
   public const string ImagesDir = @"C:\LEADTOOLS23\Resources\Images"; 
} 
Requirements

Target Platforms

Help Version 23.0.2024.2.29
Products | Support | Contact Us | Intellectual Property Notices
© 1991-2024 LEAD Technologies, Inc. All Rights Reserved.

Leadtools.MedicalViewer Assembly
Products | Support | Contact Us | Intellectual Property Notices
© 1991-2023 LEAD Technologies, Inc. All Rights Reserved.